Rancang Bangun Media Ajar Implementasi Finger Print Pada Pintu Geser Perpustakaan

Main Article Content

Abdul Tahir
Jasman Jasman
Irdam Irdam

Abstract

Library visitor data is one of the indicators for assessing the success of managing a library. The library manager must ensure that every visitor data is recorded properly, so that the information obtained from processing the data can be used as a basis for continuous improvement, therefore for this activity to run well, an accurate, effective and efficient visitor recording system is needed. This research was conducted to provide solutions related to the above problems by building a library visitor recording system with biometric identification using fingerprints. The method used in this study is an experimental method by designing, manufacturing and testing tools. This system is equipped with the use of sliding doors as security which will open if library visitors have gone through the fingerprint identification process. Testing is carried out in three parts, the first test is on the application, database, and connection to the fingerprint module. The second test is on the connection between the fingerprint and the driving motor and the third test is on the Arduino connection with sliding door movement and limit switch performance. The test results go well and the system can work to record automatically, open and close doors according to the settings that have been made.

Article Details

How to Cite
Tahir, A., Jasman, J., & Irdam, I. (2023). Rancang Bangun Media Ajar Implementasi Finger Print Pada Pintu Geser Perpustakaan. Journal on Education, 6(1), 386-394. Retrieved from https://jonedu.org/index.php/joe/article/view/2952
Section
Articles

References

Adriansyah, A., & Hidyatama, O. (2013). Rancang Bangun Prototipe Elevator Menggunakan Microcontroller Arduino Atmega 328P. Jurnal Teknologi Elektro, 4(3). https://doi.org/10.22441/jte.v4i3.753
Handoko, P., Hermawan, H., & Nasucha, M. (2018). Sistem Kendali Alat Elektronika Menggunakan Mikrokontroler Arduino Uno R3 Dan Ethernet Shield Dengan Antarmuka Berbasis Android. DINAMIKA REKAYASA, 14(2), 92–103.
Kadir, A. (2008). Dasar Perancangan & Implementasi Database Relasional. Andi Publishe.
Nugroho, L. A., & Pungkasanti, P. T. (2021). Sistem Informaasi Perpustakaan Berbasis Web dengan Framework Codeigniter. Information Science and Library, 2(2), 83–91.
Pajaransyah, R., Darmanto, T., & Saputra, D. E. (2019). Penambahan Fitur Buku Tamu pada Aplikasi Open Source Slims di Perpustakaan STMIK “AMIK BANDUNG.” MIND Journal, 3(2), 1–15. https://doi.org/10.26760/mindjournal.v3i2.1-15
Puspitasari, D. (2015). Analisis Pengunjung Perpustakaan dan Peminjaman Buku Tercetak pada Perpustakaan Universitas Airlangga. Berkala Ilmu Perpustakaan Dan Informasi, 10(1), 9. https://doi.org/10.22146/bip.7707
Siswanto, A., Efendi, A., & Yulianti, A. (2018). Alat Kontrol Akses Pintu Rumah Dengan Teknologi Sidik Jari Di Lingkungan Rumah Pintar Dengan Data Yang Di Enkripsi. Jurnal Penelitian Pos Dan Informatika, 8(2), 97. https://doi.org/10.17933/jppi.2018.080201
Syahwil, M. (2014). Panduan Mudah Simulasi dan Praktik Mikrokontroler Arduino. Andi Publisher.
Wibowo, D. P. S. (2018). Perancangan Sistem Monitoring Dan Pengujian Kehandalan Menggunakan Kualifikasi Cronbach’s Alpha . IncomTech,Jurnal Telekomunikasi Dan Komputer, 8(2), 152–162.