Kinerja Training Kit Mesin Pengisi dan Penutup Botol otomatis Sebagai Media Praktik Programmable Logic Controllers di SMK
Article Sidebar
Main Article Content
Abstract
This research aims to: (1) develop a prototype of an automatic bottle filling and capping machine training kit as a Programmable Logic Controllers (PLC) practice tool in vocational high schools (SMK), and (2) assess the performance of the automatic bottle filling and capping machine training kit as a PLC practice tool in SMK. This research adopts the research and development methodology in the field of education. The development model used is the ADDIE model by Robert Maribe Branch. The research consists of the following stages: Analyze, Design, Develop, Implement, and Evaluate. The data collection techniques employed in this study are interviews and questionnaires, using interview guides and questionnaires as instruments. The data obtained were analyzed descriptively. The results of the research indicate that: (1) a training kit for an automatic bottle filling and capping machine has been developed, which consists of main components such as the Conveyor Unit, Water Filling Unit, Water Capping Unit, OMRON CP1E N40 PLC Unit, Training Kit Components Unit, and Input/Output Terminal Block. This training kit serves as a PLC practice tool in SMK; and (2) the automatic bottle filling and capping machine training kit exhibits good performance, as demonstrated by the testing of 43 components, all of which functioned properly. The functional testing conducted under Initial Condition, Watertank Condition, Run Cycle Condition, Stop Condition, and Emergency Condition showed that all components (100%) performed well.
Article Details
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
Alphonsus, Ephrem Ryan, & Abdullah, Mohammad Omar. (2016). A Review On The Applications Of Programmable Logic Controllers (Plcs). Renewable And Sustainable Energy Reviews, 60, 1185–1205.
Branch, Robert Maribe. (2009). Instructional Design: The ADDIE Approach (Vol. 722). Springer.
Hariyadi, Mohammad, & Wanarti, Puput. (2014). PEMBUATAN MEDIA BELAJAR TRAINER PLC PADA MATA DIKLAT PLC DI JURUSAN TEKNIK ELEKTRONIKA INDUSTRI SMK NEGERI 2 LAMONGAN. Jurnal Pendidikan Teknik Elektro, 3(3).
Ibrahim, M. Nur Fauzi. (2016). PENINGKATAN KOMPETENSI MEMBUAT HUMAN MACHINE INTERFACE (HMI) SISWA KELAS XII DENGAN MEDIA PEMBELAJARAN APLIKASI OMRON CX-SUPERVISOR DI SMK N 2 DEPOK SLEMAN. Jurnal Pendidikan Teknik Elektro, 6(3).
Rauner, Felix, & Maclean, Rupert. (2008). Handbook Of Technical And Vocational Education And Training Research (Vol. 49). Springer.
Sukir, Sukir. (2010). Simulasi Pengendalian Multiproses Industri Dengan Programmable Logic Controller Sebagai Sarana Dan Bahan Ajar Praktik Instalasi Listrik. Jurnal Pendidikan Teknologi Dan Kejuruan, 19(1), 81–104.
Wardana, Hermawan Rizki. (2016). PENGEMBANGAN MEDIA PEMBELAJARAN SIMULATOR LIFT BERBASIS PLC OMRONPADA MATA PELAJARAN INSTALASI MOTOR LISTRIK. Jurnal Pendidikan Teknik Elektro, 6(2).
Yuniarti, N., Yatmono, S., & Wicaksono, T. (2019). Automatic Water Filling And Capping Machine Trainer Kit Programmable Logic Controller Controller Prototype For Vocational High School Learning Validity. IOP Conference Series: Materials Science And Engineering, 535(1), 12019. IOP Publishing.